Product Experts Available Now!
Call 1-800-940-8924
Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs
(904 reviews)
Price: $250.26
In Stock
Lippert
Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop - 25-3/4" Wide - Steel - 300 lbs
Part Number: LC432687
In Stock
$250.26
Retail:$314.24
You Save: $63.98
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (904)
- Q & A (0)
- Photos
Lippert RV Steps - LC432687
Highlights
- Steady footing at every step: Non-skid tread tape and water channels help prevent slips.
- Simple to use: Pull out the 3-step design with one hand and fold it back for travel.
- Built to last: Black powder coated steel resists rust and stays strong over time.
- Comfortable climb: 7" rise between steps makes entry easier and more natural.
- Sized for most setups: Fits entry heights from 24-1/2" to 27-1/2" with 25-3/4" wide steps.
- Secure install: Bolts or welds to frame; bracket measures 27-1/2" wide x 14" tall x 12" deep.
Features to know about
Sturdy Replacement for Worn or Bent Steps: 300 lb Steel Frame with 7" Rise
These steel pull-out steps are built to last with a 300 lb weight capacity and a solid black powder coat that resists rust over time. Each of the three steps has a 7" rise, giving a comfortable climb that feels stable and natural. They’re a dependable upgrade when your old steps have seen too many miles or taken one too many bumps.
Safe Footing in Any Weather: Non-Skid Tread and Water Channels
The 25-3/4" wide x 8-3/4" deep steps have anti-skid tread tape and built-in water collection channels with drain holes. Rain won’t pool on the surface, and the textured treads keep you steady even when conditions are wet. It’s the kind of detail that makes every entry and exit feel more secure.
Easy to Use and Store: One-Hand Pull-Out Operation
The manual pull-out design opens and closes smoothly with one hand. A grab handle makes it simple to deploy without getting fingers near moving parts. When you’re done, the steps slide back under the frame for travel and stay tucked out of the way until you need them again.
Fits Standard Mounting Points: 27-1/2" Bracket with Bolt-On or Weld-On Install
The mounting bracket measures 27-1/2" wide x 14" tall x 12" deep, designed to bolt or weld directly to the frame. The bolt holes are 26-1/4" wide x 7" deep on center. For most users, the steps line up easily with existing brackets to replace factory units and fit entry heights from 24-1/2" to 27-1/2".
Built to Last: Rust-Resistant Finish with 1-Year Warranty
The heavy-duty steel frame is protected by a black powder-coat finish that holds up to road debris and moisture. With its simple, proven design and a 1-year warranty, this step assembly provides a long-term fix that feels solid every time you climb aboard.
Specs
Dimensions
- Entry height: 24-1/2" - 27-1/2"
- Step dimensions: 25-3/4" wide x 8-3/4" deep
- Mounting bracket dimensions: 27-1/2" wide x 14" tall x 12" deep
- Drop/Rise: 7"
Weight and Capacity
- Weight capacity: 300 lbs
Warranty
- Warranty: 1-Year warranty
| Entry Height | 25-1/2" Mounting Bracket Width | 25-3/4" Mounting Bracket Width | 27-1/2" Mounting Bracket Width | 28" Mounting Bracket Width |
|---|---|---|---|---|
| 14-1/4" - 17-1/4" | Not available | LC432678 | Not available | Not available |
| 21-1/2" - 24-1/2" | LC432682 | Not available | Not available | Not available |
| 24-1/2" - 27-1/2" | Not available | Not available | LC432687 | Not available |
| 31" - 34" | Not available | Not available | LC432696, LC432690 | Not available |
| 36-3/4" - 39-3/4" | Not available | Not available | Not available | LC432698 |
432687 Lippert Components (LCI) Triple Radius Entry Step
Similar to Hickory Springs 953240RFXWC3, 95324EXTALC1, and 953240RFALC1
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Too difficult to install
Ratings & Reviews
4.8
904 reviews
by:
Stephen
08/31/2026
Original steps on our trailer had only two and the first step down was almost half of the distance. Very hard for us old people to make. Now with three steps it is much easier to get into and out of the trailer.
by:
Steve
07/26/2026
Fast shipping
by:
Joe
10/09/2026
I was really surprised the driver was going to be able to find the address I've had so much problems with a couple of FedEx drivers. They can't find the address even though they drive right by it. I chased one down to get a package at my neighbors on the same street I was on Thank you for your support.
by:
Jim
08/02/2020
I bought a used fifth wheel that had a broken step on it, so I googled my trailers info and etrailer.com came up with the part number and price, ordered it and got it in four days and in a half hours time with my wife’s help we had it installed using a couple blocks of wood and 2x4.
It feels nice and safe now.
It feels nice and safe now.
by:
Roy
06/09/2020
The steps were exactly as described. Easy to install and a perfect fit on my 2006 Montana 3400RL 5th wheel. Shipping was fast and free.
by:
Tim
05/17/2023
Trailer not required. Steps completed a stairway to the baptisamal.
by:
Casey
03/11/2026
Always great and easy to work with!!!
We love y’all here at Emergencytrailer
We love y’all here at Emergencytrailer
by:
Rickey
08/11/2018
Very good product and very strong. Fast shipping. Had to make some modifications, but I was expecting that. They do hang down a little more than I expected but should be fine. Thanks for a great product
by:
John
10/21/2025
The universal fit was not. the steps required some modification that the average person would not be able to accomplish with just hand tools. Once installed the top two steps were level and solid feeling but the bottom step has an upward tilt.
by:
Mitch
05/19/2026
Order came on time and was an exact fit. The video with the dimensions was what I needed to make sure it was the right one.
by:
Dave
08/17/2019
Amazing product and outstanding service. I could not be happier.
I had not seen a set of LCI fold up stairs installed on a step van and George was a lot of help with info I needed. I purchased a used set in case it didn't work and they turned out perfect.
I had not seen a set of LCI fold up stairs installed on a step van and George was a lot of help with info I needed. I purchased a used set in case it didn't work and they turned out perfect.
by:
Howard
07/11/2025
Turned out very well. I killed my old two-step on a close gate post (caused by my mental vacancy) and wanted to replace it with a three step. I had raised 5th wheel significantly for back country travel. This worked out well with some slicing and dicing of metal, and some extra brackets. Delivered in good time and a reasonably well made product.
by:
Linda
05/23/2024
Good sturdy product, it was easy to install on my RV. No hardware came with it so I just used the old from the steps I was replacing.
by:
Charles C.
11/21/2016
We have a bunkhouse Cruiser Aire. My wife had polio as a young girl and has problems getting up and down stairs, She is 72 and it became near impossible for her to access the RV. I built her some stairs from lumber and they worked alright, But it also gave me some added chores with a lot of straining to move them from the back to the door for her at every stop. I was absolutely surprised when I discovered the lippert steps with the shorter 6.5" rise. Believe me rise in steps is extremely important to handicapped people. These new steps have given new meaning to access for her. We are very happy we found Lippert steps through E-Trailer! We are going to buy another set next year for the rear door of the trailer. Great customer service and fast shipping! Glad your here!
Charles C.
11/21/2017
Very nice!
by:
Keith
08/27/2021
We have sold the RV that I had purchased the steps for and just hung onto them. The RV that we replaced it with has a little better steps so I haven't installed the Solid Step on this one. I still may do it but this RV is a little higher off the ground so I don't know if the 3 step unit is going to be tall enough. The Lippert Solid Step is definitely an upgrade for anyone that has the manual pull out steps on their unites.
Keith
8/29/2022
We have not used the steps on our newer 5th wheel because the steps are about a 14 too wide for the doorway. I still would recomend the Solid Step for anyone wanting to to upgrade their entrance steps. They are have a greater tread depth than most standard steps. They are more stable seeing as they are contacting the ground.
by:
Marilyn
06/05/2025
When I ordered the steps, the gal on the phone was so helpful to make sure I ordered the correct size to fit our trailer. They arrived in a few days and my husband was able to install them even though he's not mechanical inclined without any problems! I highly recommend this company and if I ever need anything I will try then first!!!
by:
Mike
09/29/2023
Had to make a slight modification to the mounting bracket on the trailer. Steps are a perfect replacement. Like the ease of operation. Good choice of steps. Very quick service. Ordered on Monday arrived on Wednesday afternoon.
Mike
9/30/2024
Working really good. Steps fold and unfold smoothly. Very sturdy.
Andrew N.
9/30/2024
@Mike That's great to hear, Mike. I'm glad they're still working well for you. Feel free to reach out if you need help with anything in the future!
by:
Jeffrey
02/05/2026
Perfect! Would do it again without hesitation! I will say, the box had me worried.
by:
Ed S.
10/13/2019
We ordered new steps from etrailer for our 5th wheel when the metal tore on one side of our existing steps. We had done our homework - checked others sites. The difference - etrailer had the replacement steps in stock at a better price than most and answered my questions. The steps arrived as promised. Instructions were clear and the install was easy. I was able to do it without help.
by:
Mike C
05/07/2020
The steps on the 2014 Winnebago travel trailer had rusted-out due to the spring-loaded pieces of grey non skid carpet always being wet in the stowed position. This replacement was a very simple bolt in with a good fitting bolt pattern and easy fold out operation. Of course you should stay on top of it with a little touch-up paint here and there cuz it's going to want the rust in the hinges and wear points but that is to be expected. Good product and I would recommend it
by:
Lisa
07/11/2025
Perfect fit very good quality and timely shipping.
by:
John L.
04/11/2021
Not that same quality as before. Shop for different brand. I bought two sets of steps from e-trailer a few years ago. When one got damaged I recently ordered another to replace it. The quality and appearance of the new set is not at all the same as the older ones. I suspect that most of the good reviews are for the older item. The new one has paint than looks like it came out of a spray can, armature looking welds, thinner weaker looking grab handles that look like they were bent by hand in someone's garage. I am very disappointed in the quality and disappointed that I could not get a set of steps that match the ones still on my other door.
Aside from that they work and fit in place of the old ones just fine. But given the quality they are about double the price they are worth and not something I really want on my RV but I feel like I am stuck with them now.
Aside from that they work and fit in place of the old ones just fine. But given the quality they are about double the price they are worth and not something I really want on my RV but I feel like I am stuck with them now.
by:
Robert
06/08/2020
Perfect replacement steps for our travel trailer. Website provided great information to take guess work out of measurements to find a perfect fit.
Robert
6/9/2021
After a year we could not be happier with the steps, easy to install, folds very easy, very sturdy.
by:
Michael
07/17/2018
Nice solid step system! Replaced a 2 step 9-1/2 inch rise set and what a great upgrade! Great product, price & fast shipping.
Michael B.
7/17/2019
Fantastic!
by:
KD
10/18/2021
The product was excellent and an exact match to what was already on the travel trailer. 5 stars to etrailer and great service.
Kd
10/19/2022
Since my last review of this product, due to an accident, I have purchased another set. Installation was simple and the steps work great.
25
904
true
Show More Reviews
See what our Experts say about this Lippert RV Steps
- Dimensions of Flexco Manual Pull-Out Steps for RVs # SMFP-4400The bolt to bolt distance on the Flexco Manual Pull-Out Steps for RVs, # SMFP-4400, measures 28-1/8 inches and the sliding bolt at it's highest point is approximately 3-1/2 inches below the mounting base. I have attached a dimensional diagram for you.
view full answer...
- Recommended Manual Pull-Out Step for a 27" and 27-1/2" Step BracketHey Rick. If the bracket on your trailer is 27-1/2" wide, you'll need to use the Flexco Manual Pull-Out Steps for RVs item # SMFP-3100. These steps are designed for 27" brackets. I recommend grabbing a different tape measure and seeing if you get the same 27-1/4" measurement. If your tape measures are like mine some of them are off. We've got steps for 27-1/2" wide and 27" wide but none for 27-1/4". You definitely won't be able to get the Lippert Manual Pull-Out Step for RVs item # LC432687...
view full answer... - Looking for Replacement Steps for 2013 Cougar 19RBEAre there steps there currently? If so how many steps are on the assembly and what is the overall width? If you could email me a picture of them that would be helpful as well.
view full answer... - Replacement Steps for 2026 No Boundaries NB19.2Hey Bill! Are you referring to the Lippert Manual Pull-Out Step for RVs # LC432687? These are designed for a 24-1/2" - 27-1/2" entry height and are 25-3/4" wide with a 27-1/2" wide mounting bracket. Is there a specific reason you want to replace the existing steps on your NB19.2? It looks like it came with the MORryde StepAbove steps that flip up into the door which I really like. You're going to have a loss of clearance with the Lippert steps and they aren't as solid. I have some pull...
view full answer... - Replacement Steps For 27-3/4 Foot Trailer With 3 StepsOn of our most popular 3 step options is the Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop/Rise - 24" Wide - Steel - 300 lbs # LC432687. This step has Mounting base dimensions of 27-1/2 inches wide x 9 inches deep. The bolt hole centers are 26-1/4 inches wide x 7 inches deep. We also have electric step options like Lippert Components Kwikee 25 Series Triple Electric Step # LC3658374. If you let me know your bracket dimensions and mounting hole dimensions, I can confirm a replacement...
view full answer... - What to Do If RV Steps Don't Line Up with Brackets on RV FrameHey Thomas, it's not uncommon for RV steps to not be easily replaced due to bolt holes not lining up with what's currently being sold. In situations like this the answer is that you can use a new set of brackets/outriggers like the part # LC301704 so that you can get the brackets in the correct spot to install steps like the part # LC432687 that you referenced.
view full answer... - How Much Do The Lippert Manual Pull-Out Steps # LC432687 Weigh?The Lippert Manual Pull-Out Steps # LC432687 weigh 54lbs.
view full answer... - Could Bottom Step of Lippert Manual Pull Out Step LC432687 be RemovedHey Karen, yes you could remove the lowest step of the Lippert Manual Pull Out Step part # LC432687 like you are wanting to and you'd have the size steps you are wanting in a double step instead of a triple step. The steps are designed to come apart in this way though so you might have have to bust out the cutting wheel with a grinder to remove the last step.
view full answer... - 3 Step RV Step Replacement Solution for Brackets 25-1/2 inches in WidthAll of the triple steps we offer like the part # LC432687 that you referenced are 27 inches in width. If you need a triple step you would need to have the mounting brackets on your trailer moved to accommodate these steps. Any qualified fabricator in your area should have no problem moving the mounting brackets to allow the steps to install. Or for a new set of mounts you could use the Outriggers part # LC301704.
view full answer... - Replacing Auto Steps With Manual Steps on Forest River RVThe steps you need are going to depend on some measurements you'll need to take; as for the installation, each of these can be either bolted on or you can have a professional weld them on. The right step for you is going to depend on the amount of length you have from your doorway to the ground, as well as your current mounting base dimensions, which need to match up in order to get a secure fit. The Lippert Manual Pull-Out 2 step # LC432682 has mounting base dimensions of 25-1/4" wide...
view full answer... - How to Correctly Measure for Trailer StepsIn order to find the correct fit, you are going to have to do a little measuring. You will want to start by measuring the width of your current step assembly, followed by the height from step to step. After that, you will want to measure from the center of the step assembly at the crossbar to the diagonal line at edge of the bottom stair. For example, the Lippert Manual Pull-Out Step, # LC432687, has three steps and measures seven inches at the bottom two steps, has a stair assembly width...
view full answer...
- Which Lippert Manual Pull-Out Steps Fit Intech Sol Horizon RoverTo find which steps fit your Intech Sol Horizon Rover you will have to measure. The Lippert pull-out steps attach the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match...
view full answer... - RV Step Recommendation Where Mounting Bracket is 27-1/2 inches in WidthAre measurements are not like lumber measurements that round up. If the overall width of your existing steps is 27-1/2 inches then the Manual Pull-Out Steps # 953240RFALC1 are going to be the best option.
view full answer...
- Replacing RVs 2-Step With a Manual Pull-Out 3-StepThere are 24" wide options for three steps that are manual pull-outs similar to the Lippert # LC432687 that you referenced. You may want to consider the Flexco # SMFP-3100, which has step dimensions of 24" wide x 9" deep, mounting base dimensions of 28-1/8" wide x 9-3/4" deep, a bolt hole pattern of 25-3/8" Wide x 5-1/2" deep (from first to second bolt hole) 25-3/8" Wide x 7" deep (from first to third bolt hole) and drop/rise of 8". The Flexco # SMFP-3200L is a similar product but has a...
view full answer... - Recommended Replacement Steps For 2017 Forest River Sandstorm 27I can absolutely recommend a set of replacement steps for your 2017 Forest River Sandstorm 27 but you will need to do a quick measurement of your entry height to confirm the correct model as we unfortunately do not have a way of checking the entry height on your RV. I recommend the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear which you will need # TLA8104 if your entry height is between 32-1/2" - 44", # TLA8103 if your entry height is between 25-1/2" - 36", or # TLA8102 if...
view full answer...
- RV Pull Out Step Solution for Hay Wagon with 33 inch Floor HeightFor a 33 inch floor height I'd recommend a 4-step pull out step setup like the Flexco Manual Pull-Out Steps for RVs # SMFP-4400 over a 3 step as you'll want that extra step based on the height you have. To help attach the steps to your RV a set of outriggers # LC301704 would be your best option. These will easily attach to your trailer frame and give a set of brackets for the steps to secure to.
view full answer... - Replacement 3-Step Pull-Out Steps for Jayco White Hawk Travel Trailer There should hopefully be a model number or manufacturer information somewhere on your step assembly. This would typically be printed on a sticker on the underside of the steps or brackets. If you can't find any identifiable information, you can also choose a compatible replacement based on the measurements for your existing assembly. You will want to make sure the mounting bracket features the same dimensions for easy installation. The closest Lippert 3-step assembly we have to the...
view full answer... - Triple Step Recommendation for a 2010 Springdale SRTThe Triple Step part # LC432687 would work for you and could potentially install pretty easily depending on where you measured the distance between the mounting brackets. I attached a picture and a set of installation instructions that have the dimensions of this step listed for you to check out. You may already have outriggers installed on your 2010 Springdale SRT, but if not you would want the part # LC301704. I also attached a couple helpful videos for you to check out as well.
view full answer...
- Replacement Pull-Out Steps for 2012 Keystone Cougar 5th Wheel TrailerThe Lippert Manual Pull-Out Step for RVs - Triple # LC432687 referenced in your question should work great on your 2012 Keystone Cougar 5th Wheel Trailer. To confirm that this will mount to the existing hardware on your trailer, I recommend simply measuring the mounting base dimensions and bolt holes on your existing unit. I have included a video that actually shows how to take these measurements. The Lippert Pull-Out Steps has a mounting base that is 27-1/2 inches wide and 9 inches deep....
view full answer... - Replacement Steps for a 2002 Holiday RamblerIn order to determine what would be the correct replacement steps for your 2002 Holiday Rambler you will need to get the dimensions of the steps that are currently on your trailer and compare them to the picture I attached that shows the dimension of the RV Steps part # LC432687. If the dimensions match what is in the picture the # LC432687. I attached a measuring video for you to check out as well as an install video for the steps that should be very helpful.
view full answer...
- Is 27-1/2 inch RV Step Mounting Bracket Width Normal Size27-1/2 inch wide mounting brackets is very common for RV steps as that's what is most commonly seen on RVs. That's why RV steps like the part # LC432687 have overall widths that match that.
view full answer...
- Recommended RV Steps For A 2015 Lance Trailer With A 25-1/2" Mounting Bracket Spacing We do carry adapters # LC301704, but with yours new steps sitting further out you might have some issues with the crossbeam of the step hitting the current mounting brackets. If you wanted to make it work you could cut of the older brackets and use the # LC301704 to mount the new steps. If you'd rather just get ones to mount to the current brackets then we do have a few other options available. For Lippert we have part # LC432682, which are designed for a 21-1/2" - 24-1/2" entry height....
view full answer... - Can Double Step for RV be Replaced with Triple StepWe aren't going to have a three step solution that will bolt right up to what you have currently. The larger amount of steps all have the additional width. If you'd be willing to have new brackets installed you could use a three step kit like the part # LC432687 that you referenced which has 7 inches between the steps. For new outriggers/brackets you could use the part # LC301704.
view full answer... - Could RV Pull Out Steps Be Installed on Pontoon Boat TrailerThe Lippert Electric Tread Lite Step # LC353621 was not intended for boat trailer applications where it would get submerged. None of our powered options were designed for that. You'd have to go with a manual pull out step like the Hickory Springs steps part # 952240RXWAC1.
view full answer...
Do you have a question about this RV Step?
Info for this part was:
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Halie H
Installed by:
Cole B
Written by:
Chelsea B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rob
5/24/2025
Great! No problems. My ideal would have been a 4 step with 7” rise to accomodate a handicapped person but I don’t believe they are manufactured. I purchased a portable adjustable step for the first step up to the new step.